Chemicals
Product Categories
« Back to Store
Air Blowers
Chemical Feeders
Chemicals
Filtration
Maintenance Supplies
Automatic Pool Vacuums
Mechanical & Plumbing
Pool & Spa Lighting
Pumps & Motors
Heaters
Safety Equipment & Supplies
Chemical Controllers & Automation
Testing Supplies
Spa & Sauna Accessories
Covers & Reels
Pool Winterizing
Lifeguard Chairs
Diving Stands & Boards
Starting Platforms
Racing Lanes & Pace Clocks
Basketball, Volleyball & Play Features
Ultraviolet (UV) Light Systems
Pool Fencing
Stain Drop Spot Stain Chalk
![Stain Drop Spot Stain Chalk](/_uls/resources/SD-Spot-Stain-Chalk-9oz-1_resized.jpg)
Spot Stain Chalk is applied directly to the problem area to remove stains created by metals and organic stains from leaves and debris. This product is safe for all hard surfaces, including plaster, vinyl, tile, concrete and fiberglass.
- DIRECTIONS FOR STAINS BELOW WATER: Wearing gloves, gently rub Spot Stain Chalk directly onto the surface stain to build up a layer of stain- removing chalk. Most stains will dissipate shortly after contact. If needed, use a nylon brush or similar non-abrasive pad to help lift stains.
- ALTERNATIVE METHOD: Place Spot Stain Chalk directly onto the stain but for no more than 5 minutes at a time, checking stain occasionally. Once stain has lifted, remove this product. Older and difficult stains may need to be treated with a sequestering agent prior to use. A sequestering agent should be used after removal of stains to prevent stains from reappearing.
- DIRECTIONS FOR STAINS ABOVE WATER: Apply a small amount of water onto area being treated. Gently rub Spot Stain Chalk onto wetted stain to form a paste. Most stains will dissipate shortly after contact. Brush treated area as needed. Rinse after 1 minute and repeat process as needed. Do not allow rinsed material to dry on hard surfaces.