Filtration
Product Categories
« Back to Store
Chemicals
Testing Supplies
Chemical Controllers & Automation
Chemical Feeders
Pumps, Stainers, Motors & Parts
Spa Air Blowers
Filtration
Pool & Spa Heaters
Mechanical & Plumbing
Spa & Sauna Accessories
Automatic Pool Vacuums
Maintenance Supplies
Safety Equipment & Supplies
Ladders, Handrails, Steps & Accessories
Pool & Spa Lighting
Pool & Spa Covers
Pool Winterizing
Aquatic Exercise Equipment
ADA Pool Lifts, Pool Access & Training
Lifeguard Chairs
Diving Stands & Boards
Starting Blocks & Platforms
Competitive Racing Lanes & Pace Clocks
Basketball & Volleyball
Safety Padding & Play Features
Ultraviolet (UV) Light Systems
Pool Fencing
Defender® Regenerative Media Filters
With thousands of installations worldwide, the Defender RMF filters have earned the reputation of the “gold standard” for recreational water and life support system filtration applications. Compared to other technologies, Defender regenerative media filters maximize performance, efficiency and user friendliness while helping reduce environmental footprint – an outcome good for the planet. The ability to remove particles as small as one micron provides the clearest, cleanest and safest aquatics environment possible. And if that’s not enough, facility operators can achieve significant savings up to the following in several key areas: Water 90%, Space 75%, Energy 50%, and Chemicals 30%.
Benefits
WATER SAVINGS
Due to its innovative "bumping" process the Defender RMF systems significantly eliminate the amount of backwash water going to the drain. Instead of backwashing, the Defender filter is programmed to automatically “bump” to regenerate the fine-grade perlite media for a fresh start. After approximately 4 weeks of "bumping" the perlite may be saturated with dirt particles and require a quick media replacement.
CONSTRUCTION SAVINGS
The Defender RMF technology represents what it truly means to be a compact filter. The small footprint requirement results in as little as one-fourth to one-sixth of the space required by an equivalently sized sand system, saving on installation costs, rigging time and more. With a much lower operating weight, the Defender filter reduces the extent to which the floor slab must be engineered. When building costs are at an estimated $75 to $150 per square foot, selecting a Defender filter could generate construction savings in the tens of thousands of dollars. In older facilities where expanding the footprint is not an option, this technology will enable you to achieve your goals while utilizing your current footprint.
POWER SAVINGS
The Defender filter reduces head loss when compared to traditional sand filters, ultimately saving motor horsepower operational costs. Starting differential pressures for a high-rate sand filter, depending on the media, could range from 4 to 6 psi (27.6 kpa to 41.4 kpa). In contrast, the starting differential of the Defender filter is approximately 1 psi (6.9 kpa).
Converting this to head represents savings of nearly 12 feet (3.65m) total dynamic head, or TDH, which directly translates to horsepower and energy savings. For example utilizing a 25hp motor instead of a 30hp unit would result in electricity savings of $3,000 per year.
PREMIUM WATER QUALITY WITH SAFETY TOP OF MIND
The Defender filter removes particles down to 1 micron in size. With the growing concerns of recreational waterborne illnesses (RWI) such as cryptosporidiosis, the smaller the particle removal the better the water quality and safety of your bathers. The Defender filter is especially effective on pools with heavy bather loads because of the increased filter area and dirt holding capacity.
With its fine filtration capabilities the Defender filter will also delay the increase in turbidity. The high-performance filtration capabilities, along with the reduction of make-up water due to minimizing backwash cycles, reduces the chemical requirements and the associated turbidity buildup.
ENERGY & CHEMICAL SAVINGS
The dramatic reduction of backwash waste directly translates to savings in make-up water along with the chemicals and fuel for re-heating. Consider the cost of chemically treating 1.4 million gallons and the BTU’s required to heat this volume from 50 degrees (10 °C) to 80 degrees Fahrenheit (27 °C).
It is also important to note that the improved water quality generated by the Defender filter's ability to remove finer particles will also save on general chemical consumption.
Estimated annual savings ranges from $42,000 to $52,000 depending on local fuel costs for oil, gas or electricity. This is based on the backwash water consumption of a typical waterpark attraction with a 2000 GPM (454 m3 /hr) recirculation rate.
Visit Neptune-Benson for complete information.
