Hanna pH & Temperature Tester with 0.1 pH Resolution - pHep®4

The pHep^®4 lightweight, sleek tester is accurate to 0.1 pH with a built-in thermometer to automatically adjust the pH reading for temperature. The waterproof design (it floats), simple operation, and replaceable electrode mean that you can rely on this meter for years. You can replace the pH electrode for just $59. The large LCD display shows both pH and temperature readings simultaneously, while a stability indicator is displayed to alert you when a stable reading has been obtained.

• Extend the life of your pH tester with a replaceable electrode.
• Automatic calibration for accurate pH readings every time.
• Great for environmental, field, and laboratory testing.

 The pHep^®4 is a waterproof ph pen for water with a 0.1 pH resolution and an accuracy of ±0.1 pH. It has many advanced features that are found in more expensive portable instrumentation. One or two-point calibration is automatic to two selectable buffer sets (4.01, 7.01 and 10.01 or 4.01, 6.86, and 9.18). The pHep^®4 also features a replaceable electrode with a stainless steel round connector. This cartridge design has no pins to line up or that can break. The HI73127 replacement pH electrode also features an extractable cloth junction. The extractable cloth junction of the HI73127 allows for the renewing of the junction. Simply extract ⅛” of the junction by pulling on the junction will expose a new portion. Any clogging that was present will be cleared and the response time will be back to normal extending the life of the pH electrode.

Features at-a-glance

Waterproof ph Tester for Water

• Designed to float if accidentally dropped in a tank

Expanded pH Range

• pH range is from -2.0 to 16.0 pH

Automatic Temperature Compensation

• All readings are compensated for variations in temperature
• Temperature displayed in ^°C or ^°F along with pH reading

Stability indicator

• Meter displays a clock tag that will disappear when the reading has achieved stability

HOLD button

• Freezes reading on the display to allow recording of measurement

BEPS (Battery Error Prevention System)

• Meter will automatically shut off if there is not enough power to get an accurate measurement