Maintenance Supplies
Product Categories
« Back to Store
Chemicals
Testing Supplies
Chemical Controllers & Automation
Chemical Feeders
Pumps, Stainers, Motors & Parts
Spa Air Blowers
Filtration
Pool & Spa Heaters
Mechanical & Plumbing
Spa & Sauna Accessories
Automatic Pool Vacuums
Maintenance Supplies
Safety Equipment & Supplies
Ladders, Handrails, Steps & Accessories
Pool & Spa Lighting
Pool & Spa Covers
Pool Winterizing
Aquatic Exercise Equipment
ADA Pool Lifts, Pool Access & Training
Lifeguard Chairs
Diving Stands & Boards
Starting Blocks & Platforms
Competitive Racing Lanes & Pace Clocks
Basketball & Volleyball
Safety Padding & Play Features
Ultraviolet (UV) Light Systems
Pool Fencing
SGM Dynamite Pool Patch
SGM Dynamite Pool Patch is a mixture of specialty cement and proprietary additives that permits underwater patching and general concrete repair work to be done instantly. SGM Dynamite Pool Patch can be used wherever a quick setting caulking or plugging material is needed.
CHARACTERISTICS
- High Strength
- Sets Underwater
- Brilliant White
SURFACE PREPARATION
Repair area must be clean and free of any paint, dust, or grease. Use a Chisel V-shaped channel to allow easy application wherever possible. Dampen area prior to application (when not underwater).
APPLICATIONS
Mix approximately one (1) part water to three (3) parts SGM Dynamite Pool Patch while stirring continuously or until the material has a dough-like consistency.
- WARNING: Warm water will accelerate the set time of the patch. Mix only as much as can be used in three (3) to five (5) minutes.
Using a steel trowel or pointed tool, force material into hole or crack. To repair water leaks for underwater use, apply pressure for a minimum of five (5) minutes or until the material has firmly set. Dampen material for fifteen (15) minutes after patching to prevent cracking.
